How do I perform a treatment with wax cartridges?

A step-by-step guide to the proper use of Perron Rigot™ wax cartridges

Cartridge

Advantages: A very time-saving method of hair removal. Requires little experience and know-how, as the cartridge delivers an even layer of wax.

Requirements: The method is not universal, but is excellent as a supplement for quick and easy depilation of larger areas of the body.

Heating instructions: Place the cartridge in the heater and turn it on. The wax will be ready for use after about 20 minutes.

Important! To ensure the safety of the customer and a high standard of service, use the wax cartridges only with the appropriate heater from Perron Rigot.

Step 1 - Prepare skin

Clean the skin with Blue Lotion and check the direction of hair growth. Apply a few drops of Jasmine Oil to prevent wax from sticking to the skin later.

Step 2 - Testing wax cartridge

Take the heater and hold it upside down. Slide the cartridge over a fleece strip a few times and check whether the cartridge is inserted correctly.

Step 3 - Apply and remove wax

Apply the wax with firmer pressure in the direction of hair growth and turn the heater off again.

Step 4 - Remove wax

Place a fleece strip on the wax and press it carefully. Pull off the strip against the direction of hair growth and close to the skin surface in a quick motion.

Step 5 - Aftercare

Soothe the waxed area with Refreshing Gel or Moisturizing Lotion. Also apply a little Jasmine Oil to remove wax residue.